Accueil
t pex
1 1/4 x1 1/4x1 Pex Tee LEAD FREE! (Bag of 10) – Badger Insulated Pipe

1 1/4 x1 1/4x1 Pex Tee LEAD FREE! (Bag of 10) – Badger Insulated Pipe

4.8 (114) · € 72.00 · En Stock

1 1/4" x1 1/4" x1" Pex Tee (Bag of 10). We have over 300 of these in stock and always ship your order within 24 business hours after the order is placed. t. * Lead Free Brass * Durable and Reliable * Compatible with Pex Pipe * Fittings work with copper crimp rings or stainless steel clamps Pex Fittings: All of our

1 1/4 x1 1/4 x1 Pex Tee

(Bag of 10).

We have over 300 of these in stock and always ship your order within 24 business hours after the order is placed.

* Lead Free Brass

* Durable and Reliable

* Compatible with Pex Pipe

* Fittings work with copper crimp rings or stainless steel clamps

Pex Fittings:

All of our fittings are lead free, and made to meet ASTM standards. Also it good to remember too that not all plastic tubing is Pex, there for Pex fittings will not work with most other tubing. When it comes to the most cost effective, long term fittings to use with your Pex tubing crimp rings are the best. Cinch rings will work, but they are not as good and are more expensive. Pipe clamps are another option to use, but has some trade-offs. Benefit is a quick and easy fix, but the tradeoff is a little more expensive, and may leak down the road. The clamps will work if you have a leaky pipe and need a “quick fix”.

About PEX Crimp Rings:

PEX crimping system is the most reliable and most widely used methods of installing PEX. Crimp rings ensure full 360˚ Compression of the pipe over the barbs of the fitting without the risk of expansion or corrosion. Size of the PEX crimp ring corresponds to the PEX pipe size, namely, 1/2 crimp rings for 1/2 PEX, 3/4 for 3/4 and so on. PEX crimp rings are installed by positioning it over the pipe and fittings and compressing it with the help of a PEX crimp (crimping) tool.

Frequently asked questions about this product:

Q: How do I determine the right crimp ring size for my PEX tubing sizes?

A: The specified size of the crimp ring must always match the size of the PEX pipe it's used with.

If using a 3/4 pipe, you'll need the 3/4 rings, 1 rings for 1 pipe, etc.

Q: What if the crimp connection was done improperly or unevenly?

A: A decrimping tool can be used to remove the crimp rings, or you can use a small grinding tool such as a Dremel to remove the bad crimp ring.

Q: How far away should I position the crimp ring from end of the pipe?

A: Make sure that the fitting is fully inserted in the tubing. Recommended distance between the end of the pipe (or shoulder of the fitting) and the edge of the ring is between 1/8 and 1/4.

Q: Are these crimp rings compatible with other brand tools, fittings and tubing?

A: Yes, these crimp rings are universal and will work both with PEX crimp tools, crimp fitting and tubing sold here at Badger Pipe, and the same type components of different brands purchased elsewhere.

Q: Crimp Rings vs. PEX Clamps - which is better?

A: Both systems are widely used and accepted by code. The Crimp system, is by far the most cost effective, most dependable, and easiest system to use. This system has many years of proven performance and works well for both beginners and professionals. PEX clamp system is better for a quick temporary fix but typically does not hold up to long term use very well, and they are more expensive than Crimp rings.

Oxygen Barrier Pex Tubing will have a white lining on the inside of the pex tubing. BHS PEX tubing is made to the following specifications. OD 1.25 ID .862 Wall Thickness .13 Weight per foot .17 ASTM 876/877 Not to be installed in Direct Sunlight Made to ASTM specifications. Rated at 100 psi at 180 degrees. Rated at 80 psi at 200 degrees. Rated at 160 psi at 73 degrees. Type B PEX is made using the silane method (water bath). BHS PEX tubing is connected in 2 different ways.

1' -100' Coil - Red Oxygen Barrier PEX Tubing Htg/PLbg/In Floor HTG

1' - 500' coil - BLUE Certified Non-Barrier PEX Tubing Htg/Plbg/Potabl – Badger Insulated Pipe

1-1/4 x 1-1/4 x 1 in. Plastic PEX Expansion Tee, Zurn PEX

Pex Fittings: All of our fittings are lead free, and made to meet ASTM standards. Also it good to remember too that not all plastic tubing is Pex, there for Pex fittings will not work with most other tubing.

1 1/4 PEX Crimp MPT Male Pipe Thread ( Bag of 25 ) Lead Free!

Badger Insulated Pipe

1 1/4 PEX Crimp Elbow Lead Free! (Bag of 10)

Fittings for 1 1/4 Pex Tubing – Badger Insulated Pipe

1 1/4 PEX Crimp Coupling Lead Free! (Bag of 10)

ACR Catalog, PDF, Corrosion

O.D. tube x Male iron pipe. Sold in bags and individually flag tagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.

Anderson Metals 754049-0402 1/4flx1/8mpt fl Elbow

PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). These PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.