Custom Cable Connection microphone cables are a great choice for custom "pro" audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires wit
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors

Assembled in Dallas, TX by Custom Cable Connection

Pinout

Tip : Red

Ring : Blue

Shield : Shield

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.

Typical Applications:

Audio connections between multimedia devices.

Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.

Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc

Features:

2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire

3.5mm Male Stereo Solder Plug, Nickel plated with strain relief

1/4 Plug with 3 Conductor Nickel Shell Solder Contacts

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.

The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210

24-gauge bare copper conductors

Connectors: XLR Male Plug to XLR Female Jack

Rugged Nickel Plated XLR Connectors with Strain Relief

Neutrik NC3MXX and NC3FXX Connectors

Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Neutrik Connectors: NP3RX and NYS228

Assembled in Dallas, TX by Custom Cable Connection

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.

The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210

24-gauge bare copper conductors

Connectors: XLR Male Right Angle Plug to XLR Female Jack

Neutrik XLR NC3MRX and NC3FXX

Cable Techniques Low-Profile Right-Angle XLR Female to Straight XLR Male Stage & Studio Mic Cable (Black Ring/Cap, 10')

25 Foot Custom Cable Connection Pro-Audio XLR Balanced Microphone Cable with Neutrik NC3MXX Male and Neutrik NC3FXX Female XLR Connectors : Musical Instruments

Van Damme Microphone Lead Cable Neutrik Black Gold Male Female XLRs

TNP Premium 30ft Male to Female Right Angle XLR Cable Balanced 3 Pin Microphone Audio Wire Cord Interconnect Connector Plug Adapter Converter for Professional Recording Camcorders Cameras : Musical Instruments

Cordial Select NEUTRIK XLR Female Black to XLR Male Black Cable 3m

XLR Audio Cable with Male Right Angle to Female Straight Neutrik Conne - Custom Cable Connection

Sonic Plumber Neutrik XLR Male to Female Balanced Cable

SZRMCC Z CAM E2 or ARRI Alexa Mini Camera Audio Input Cable Neutrik XLR 3 Pin Female to 00B 5 Pin (Right Angle, 1m) : Electronics

Hosa Technology Neutrik XLR3F to Right-Angle XLR3M MXX-015SR B&H

Straight XLR-Female to 90º Right-Angle XLR-Male Cable, Made from Mogami 2552 & Neutrik Gold Connectors

25 Foot Pro Audio Balanced Neutrik NC3MXX XLR Male to Male Plenum Cable by Custom Cable Connection - White : Musical Instruments